How To Mount The E1, E2 And E3 Sensors On The Pipes - Panasonic PRO-HT Tank Series Technical Manual

Table of Contents

7.4.3 How to mount the E1, E2 and E3 sensors on the pipes

Maximum contact

Most sensitive point of the thermistor

Installation of temperature sensors

To prevent condensation entering the termi-

nals on the electrical lines, the following must

be observed. Install them with a downwards

running U-shaped loop.

PAW-VP•LDHW - Technical Manual – 2020-07

Cover the thermistor and the pipe with

aluminum tape, then the aluminum

tape with thermal insulation.

Hold the temperature sensor so that the

measuring tip points upwards. Let the control

cable of the temperature sensor hang loosely,

insert the tip of the temperature sensor to the

pipeline.

To ensure heat transfer please use heat con-

ducting paste (not included in delivery)

Wrap aluminum tape (field supplied) around

the probe tip and pipe to attach the tempera-

ture sensor, then cover with thermal insulation

and secure to pipe as shown.

Electrical Wiring

Table of Contents