How to make Settings
9.2.3 Monitoring operations (Sensor info) ECOi
9
i
84
"DN"
Description
Indoor unit intake temp. (TA)
Indoor unit heat exchanger temp. E1 (E1)
—
Indoor unit heat exchanger temp. E3
Discharge air temp. (BL)
Discharge air temp. setting
Indoor unit MOV pulse (MOV)
Discharge temp. (DISCH)
High-pressure sensor temp.
Heat exchanger gas (EXG)
Heat exchanger liquid (EXL)
Outdoor air temp. (TO)
Inverter secondary current
Inverter primary current (L2 phase) (Three phase only)
MOV pulse 1 (MOV1)
—
—
Inverter actual operating frequency
Sub cooler (MOV4)
Inverter primary current (L1 phase)
Low-pressure sensor temp.
Suction temp. (SCT)
Inverter primary current (L3 phase) (Three phase only)
Temp. sensor at refrigerant gas outlet of dual-tube temp. (SCG)
High-pressure
Low-pressure
Note
It takes about 10 seconds until outdoor unit data appears or changes on the display.
Remarks
°C
°C
°C
°C
°C
STEP
°C
°C
°C
°C
°C
A
A
STEP
Hz
STEP
A
°C
°C
A
°C
MPa
MPa
PAW-VP•LDHW - Technical Manual – 2020-07
Indoor unit
Outdoor unit