Pre-Maintenance Procedures; Raising The Machine - Toro 31900A Operator's Manual

2-wheel or 4-wheel drive traction unit
Table of Contents

Advertisement

Maintenance Check Item
Check for unusual engine
noises.
1
.
Check for unusual operating
noises.
Check the hydraulic hoses
for damage.
Check for fluid leaks.
Check the tire pressure.
Check the instrument
operation.
Lubricate all the grease
fittings.
2
Touch up any damaged
paint.
Inspect the seat belt.
1
Check the glow plug and injector nozzles if the engine is hard to start, there is excess smoke, or the engine runs rough
2
Immediately after every washing, regardless of the interval listed
3
If the indicator shows red
Notation for Areas of Concern
Inspection performed by:
Item
Pre-Maintenance
Procedures

Raising the Machine

DANGER
Mechanical or hydraulic jacks may fail to
support the machine and cause a serious
injury.
• Use jack stands to support the raised
machine.
• Use only mechanical or hydraulic jacks to
lift the machine.
Raising the Front of the Machine
Important:
Ensure that no cables or hydraulic
components are between the jack and the frame.
For the week of:
Mon.
Tues.
Wed.
Thurs.
Date
Information
1. Front jacking point—frame
tube
2. Front jack stand
point—front axle tube
49
Fri.
Sat.
Figure 44
3. Front of the machine
Sun.
g299729

Advertisement

Table of Contents
loading

Table of Contents