Product Overview - Toro 31900A Operator's Manual

the recommended pressure setting for the
attachment.
•
Rotate the adjusting screw clockwise to
increase the pressure.
•
Rotate the adjusting screw counterclockwise
to decrease the pressure.
Attachment
Rotary cutting unit
Flail Mower (Model No.
02835)
Snowthrower
Snow Blade (Model Number
MSC23345)
Rotary Broom (1.5 m or 5 ft)
9. Shut off the engine and remove the key.
10. Tighten the jam nut at the end of the
weight-transfer spool, and torque the nut to 13
to 16 N∙m (10 to 12 ft-lb).
11. Install the cap on the test port.
12. Remove the pressure gauge from the test port.
Weight-Transfer Pressure
1,724 kPa (250 psi)
1,379 kPa (200 psi)
1,724 kPa (250 psi)
1,379 kPa (200 psi)
1,724 kPa (250 psi)

Product Overview

1. Cutting unit
2. Traction pedal
3. Hydraulic-fluid tank
4. Steering wheel
5. Console
6. Operator's seat
28
Figure 24
7. Roll bar
8. Hood/engine compartment
9. Battery
10. Fuel tank
11. Parking brake
12. PTO shaft
g219621