Jog Dial Rotation Load Adjustment - Pioneer CDJ-2000NXS2 Service Manual

1

8.4 JOG DIAL ROTATION LOAD ADJUSTMENT

A
JOG Check Mode : ON
• It is the mode which judges the load (light/-- heavy) numerically when rotating the Jog dial.
JOG Check Mode : CANCEL
B
POWER OFF
[Measuring method]
C
1. The adjustment value of adjust plate is adjusted to "0" (Refer to Fig. 2).
2. Enters the mode for checking the load on the Jog dial.
3. The jog dial is mightly rotated. Moreover, the direction of the rotation is clockwise.
4. The rotation speed and time are displayed in LCD display (Refer to Fig. 1).
The time required so that the rotation may decrease from 3 X speed to 1.5 X speed when maximum speed is only
7 X speed or more is displayed.
The average of the rotation decrease time of 5 times in all is confirmed in spec or less.
Spec: 170 ± 20 msec.
5. When the rotation decreace time is coming off from spec, the adjustment value of adjust plate is changed, and it does
from 2 of above-mentioned to 4.
D
Fig. 1 Example of displaying LCD
E
[Load adjustment method]
Remove the screw fixing the adjust plate, then screw it into the hole corresponding to the value (-1, -2, -3, -4, +1, +2 or +3)
for a load to be added:
-1, -2, -3, -4 : To decrease the load
+1, +2, +3 : To increase the load
F
68
1
2
Maximum position
POWER ON
(fully clockwise direction)
CDJ-2000NXS2
2
3
Mode for checking the
load on the Jog dial
To decrease
the load
To increase the load
Fig. 2 Adjust plate
3
4
Adjust plate
4