Specifications; Basic Items For Service; Jigs List - Pioneer CDJ-2000NXS2 Service Manual

5

2. SPECIFICATIONS

Power requirements........................AC 110 V to 240 V, 50 Hz/60 Hz
Power consumption .................................................................. 41 W
Power consumption (standby) ................................................ 0.4 W
Main unit weight........................................................ 5.7 kg (12.6 lb)
Max. dimensions....... 320 mm (W) × 113.2 mm (H) × 414.4 mm (D)
(12.6 in. (W) × 4.4 in. (H) × 16.3 in. (D))
Tolerable operating temperature......+5 °C to +35 °C (+41 °F to +95 °F)
Tolerable operating humidity............ 5 % to 85 % (no condensation)
Analog audio output (AUDIO OUT L/R)
Output terminals ..........................................................RCA terminal
Output Level .......................................................... 2.0 Vrms (1 kHz)
Frequency response..................................................4 Hz to 40 kHz
S/N ratio.................................................................................115 dB
Total harmonic distortion ................................................... 0.0018 %
Digital audio output (DIGITAL OUT)
Output terminals ..........................................................RCA terminal
Output type..................................................Coaxial digital (S/PDIF)
Output level...............................................................0.5 Vp-p (75 Ω)
Output format..................................... 44.1 kHz/96 kHz, 24 bit/16 bit
USB downstream section (USB)
Port ........................................................................................ Type A
Power supply.......................................................... 5 V/2.1 A or less
USB upstream section (USB)
Port ........................................................................................ Type B
LAN (PRO DJ LINK)
Rating ........................................................................... 100Base-TX

3. BASIC ITEMS FOR SERVICE

3.1 JIGS LIST

Jigs List
Jig Name
CD test disc
DVD test disc
Software for writing the serial
number
Lubricants and Glues List
Name
Lubricating oil
Lubricating oil
Lubricating oil
Dyfree
Cleaning
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools.
Position to be cleaned
Pickup lens
5
6
Part No.
STD-905 Drive self-diagnosis
GGV1035 (DVDT-001) Drive self-diagnosis
GGS1177 For writing the serial number of the unit to the MAIN Assy after replacement.
The zipped writing tool (mmpforseigi.exe) and data file (hidcom.dll) are
posted at Niis.
See "8.3 WRITING THE SERIAL NUMBER OF THE UNIT."
Part No.
GEM1104 Refer to "9.3 CONTROL PANEL SECTION".
GYA1001 Refer to "9.4 JOG DIAL SECTION", "9.6 SLOTIN MECHA SECTION".
GEM1034 Refer to "9.4 JOG DIAL SECTION".
GEM1036 Refer to "9.6 SLOTIN MECHA SECTION".
Name
Cleaning liquied GEM1004
Cleaning paper GED-008
CDJ-2000NXS2
6
7
SD memory card section
File system .... Conforming to "SD Specifications Part 2 File System
Specification Version 2.00"
Max. memory capacity............................................................ 32 GB
Main display
Display type ...............Active matrix TFT liquid crystal display (LCD)
Supported languages ..................................................18 languages
• The specifications and design of this product are subject to
change without notice.
Accessories
• Power cord
(SYXJ: ADG1244)
(UXJCB: DDG1108)
(FLXJ: ADG1244, ADG1239)
(AXJ: DDG1114)
• Audio cable
(XDE3045)
• LAN cable
(DDE1141)
• Disc force eject pin (mounted on bottom of product)
(DEX1024)
• Operating Instructions (Quick Start Guide)
(SYXJ: DRH1322)
(UXJCB: DRH1321)
(FLXJ: DRH1323)
(AXJ: DRH1324)
Purpose of use / Remarks
Remarks
Part No.
Refer to "9.6 SLOTIN MECHA SECTION".
7
8
Remarks
7
8
A
B
C
D
E
F