Buttons; Data Entry - ABB D1M 15 User Manual

16 D1M 15 MULTIMETER USER MANUAL

5.2.Buttons

Each D1M 15 is provided with 3 push buttons as per below picture:
Functions of each button might change according to the displayed page on the meter. See below for a
complete description:
#
1
2
3
There are some functions need to use combination of pushbuttons, see below for a complete description:
Combination buttons
Down + Up

5.3.Data entry

Some of the pages require the entry of numerical characters (0-9) in the Configuration mode. In these
cases, the display will show an active field identified by a flashing number.
Data entry procedure
Press the "OK" button to start setting on the specified parameter page, and the parameter starts to blink
display.
The data entry procedure is as follows:
Short press the "Up" Arrow button to set the first(on the far left) numerical character in a loop from '0' to
'9' and '0.0', until the required character is obtained.
• Short press the "Down" Arrow button to confirm the first numerical character and move this character
to the left, or confirm the first decimal point.
• Repeat the step 1 and 2 to set the second and other numerical characters, it's the same method as the
first numerical character.
• It will add a character '0' on the right side when short press the "Down" Arrow button to move current
numerical characters to the left.
1 2
Button Short press functions
Confirm the numerical value or option input, go to the
OK
next class menu
Down Page down, numerical value amplifies 10 times
Up Page up, numerical value select 0~9 and decimal point
Screen
During entering password
3
Long press functions
Go to the main menu
Return to the previous menu
Go to the Home page
Function
Short press together to escape password
check configuration read-only.