ABB D1M 15 User Manual page 35

D1M 15 MULTIMETER USER MANUAL
35
CFG>ALM>STP
After the number is set, it is needed to use Button "Up" and Button "Down" to adjust the magnitude.
HYSTERESIS
HYSTERESIS is a percentage value, and its setting range is 0%-50%.
CFG>ALM>HYS
DELAY
DELAY is used to verify whether the variable value really exceeds the limit or is recovered, and its setting
range is 1-900s.
CFG>ALM>TIM
LOG
All alarms are by default in UNLOG mode, meaning that alarms are not stored in any flash memory.
This parameter is used to set whether the alarm is stored or not.
CONF>ALM>LOG
After device restart, all alarms will be erased, and it will not be possible to retrieve them.