Configuration (Cfg); Unit (Unt) - ABB D1M 15 User Manual

D1M 15 MULTIMETER USER MANUAL

7. Configuration (CFG)

When entering the CFG section, in order to change any configuration of the device, it is mandatory to
enter the password. It is needed to enter the password again when customer needs to re-operate after
inactivity time.
In case of wrong entering of the password for three times in a row, user will have to wait for 5 minutes
until he can enter the password once again.
In order to read only the configurations, it is possible to simultaneously press "Down" and "Up" buttons.
CFG includes the following menus:
Menu
UNT(UNIT)
ISTL(Installation)
I/O(Input/Output)
ALM(Alarm)
COM(Communication)

7.1.Unit (UNT)

UNIT includes the following sub-menus:
Menu
PWD(Password)
RST(Reset)
INF(Information)
ENS (EnergySaving)
LOG(AuditLog)
HOMPAGE
LED
Modify password (PWD)
PWD shares the same interface and setting way with password setting. For details, see
the first use
CFG>UNT>PWD
Description
Settings related to the device itself
Settings related to the installation conditions
Settings related to DO
Definition of alarm conditions
Settings related to the embedded communication protocols of the D1M
version
Description
Change the existing password
Full or partial reset of the meter
Device information
Set inactivity time of HMI for energy saving
Count the times of CT,VT, Wiring type, FW update configuration
Set to return to which page and when to return
Set to indicate the speed of energy consumption
(PWD)".
23
"6.1.Password for