ABB D1M 15 User Manual page 45

D1M 15 MULTIMETER USER MANUAL
Warnings (WRN)
WRN is generated when the device detects the operating conditions. When there is a WARN notification,
Icon will be displayed; and when there is no warn messages, Icon
WRN comprises warn count and specific warn message.
RED>NTF>WRN
Warning Definition
VOLT REVES U1, U2 and U3 are inverse in 3 phases system
V1 MISS Voltage 1 Missing
V2 MISS Voltage 2 Missing
V3 MISS Voltage 3 Missing
I1 MISS Current 1 Missing
I2 MISS Current 2 Missing
I3 MISS Current 3 Missing
I1 REVES Current 1 Reverse
I2 REVES Current 2 Reverse
I3 REVES Current 3 Reverse
I12 REVES Current 1 with 2 Reverse
I23 REVES Current 2 with 3 Reverse
I31 REVES Current 3 with 1 Reverse
DATA UDIS Measurement value too big cannot display on the displayer
USET PWD Not Locked device, not set password
FREQ WRNG Frequency out of the metering limit
V2 CONN U2 connected for single phase wires setup
V3 CONN U3 connected for single phase wires setup
I2 CONN I2 connected for single phase wires setup
I3 CONN I3 connected for single phase wires setup
will disappear.
45