Mitsubishi Electric MELSEC Q Series Programming Manual page 246

APPENDICES
Large item
Device test
Check/disable executional conditioned
device test
Executional conditioned device test
Debug
Forced input output registration/
cancellation
Debug
Skip execution
Partial execution
Step execution
Trace Sampling trace
Remote
operation
Redundant
operation
Program
memory batch
transfer
Latch data
backup
operation
Safety CPU
operation
Register
Password
Delete
setup
Disable
Clear PLC
memory
Format PLC
memory
Arrange PLC
memory
Set time
(Note-1): Only program memory.
(Note-2): Device data is impossible.
(Note-3): Can be saved only by one file (align the Common and Local).
(Note-4): Possible to set it during monitoring. When restarting after the monitoring stops, the error message is displayed.
(Note-5): Monitoring buffer memory is impossible, but can be set.
(Note-6): Possible to operate it When the switch is RUN.
Middle item Small item
FORCE ON/OFF/Toggle force
Device
Buffer memory
Execution
Register executional conditioned device
test/ Check/disable executional
conditioned device test/ Batch disable
executional conditioned device test
PLC status
RUN/STOP
PAUSE
Latch clear
STEP-RUN
Reset
Operation during RUN
Specify execution destination
Target memory
Format Type
YY MM DD Hr. Min. Sec./ Day of week/
Specify execution destination
: Available, : Available with restrictions,
App - 13
Support Remarks
(Note-5)
(Note-6)
(Note-1)
(Note-1)
: Unavailable