Cleaving Operation; Selecting A Cleave Mode - Fujitsu CT114 Instruction Manual

Cleaving Operation

Selecting a Cleave Mode

Select the insert according to the cladding diameter and the coating diameter of the optical
fiber being cleaved. When the insert is changed, select an appropriate cleave mode, or
edit the cleave mode to reflect the appropriate clamp diameter.
1. Press the DOWN key on the [READY] screen to enter the [Cleave Menu].
2. Select [Select Cleave Mode] and press the SET key.
[READY] screen
3. Touch to select a cleave mode, or use the UP/DOWN keys and press SET.
SET
key
4. The newly selected cleave mode can be verified on the [READY] screen.
In some cases the cleaver moves the left clamp after cleave mode is changed.
Remove the fiber from the cleaver if the cleaver warns that fiber should be
removed.
DOWN
key
[Cleave Menu] screen
CT114_Rev2
[Cleave Menu] screen
33