Fujitsu CT114 Instruction Manual page 7

Safety Information
WARNING / CAUTION
Do not store the cleaver in any place where temperature and/or humidity are
extremely high. Such environments may cause damage to the cleaver.
Do not place the cleaver in an unstable or unbalanced position. The cleaver may
shift or lose balance, causing it to fall. This may result in personal injury or
equipment damage.
The cleaver is a precisely adjusted and aligned instrument. Keep the unit away
from strong mechanical shock or impact. Failure to do so will result in misalignent
and lead to poor cleaving results. Use the supplied box for transportation and
storage. The box will protect the cleaver from damage, moisture, vibration, and
shock during storage and transportation.
Always set the cleaver blade to the correct position in the machine. Setting the
blade to an incorrect position may cause serious damage to the machine.
If the cleaver blade is replaced, only use the manufacturer-specified part. Failure
to do so will result in serious damage to the machine.
The cleaver requires no lubrication. Adding oil or grease may degrade the
cleaving performance and damage the cleaver.
This equipment must be repaired or adjusted by a qualified technician or
engineer. Incorrect repair may cause fire or electric shock. Please contact the
authorized distributor if any problems occur on the machine.
Keep the cleaver free of contaminants. They will degrade the cleave quality and
may cause the machine to malfunction.
Do not use the cleaver for anything other than cleaving optical fibers. Using it for
any other purpose may damage the cleaver.
RECYCLING and DISPOSAL
In European Union
In accordance with the European Parliament Directive, electrical parts and materials
that can be re-used and/or recycled have been identified in order that the use of new
resources and the amount of waste going for landfill can be minimised.
In the European Union, do not discard this product as unsorted municipal waste.
Contact your local authorities for further information.
In other countries
[Recycling]
To recycle this product, disassemble it first, sort each part separately by material
components and follow your local recycling regulations.
[Disposal]
This product can be disposed of same as the standard electric poroducts. Follow your
local disposal regulations.
CT114_Rev2
3