Table of Contents
Advertisement
Fiber Position Adjustment
Follow the on-screen instructions. A cleaving operation will start after a fiber is
4.
loaded. After cleaving, the screen will show the message circled below.
5. Remove the blade cover, then attach the Fiber Height Checking Mirror in its place.
Remove Blade Cover
The Fiber Height Checking Mirror should pass under the fiber, and be
6. Position a microscope directly above the cleaver to use the Fiber Height Checking
Mirror for inspection.
Microscope
Set the microscope directly above the mirror.
Use a magnifier with at least 10x magnification if you don't have a
microscope
Fiber Height
Checking Mirror
secured with the screw circled in yellow above.
CT114_Rev2
Overhead View
Cleaver Blade
40
Advertisement
Table of Contents
