Cleave Menu
Clamp Settings
The left clamp home position can be set.
Parameter
Clamp Settings
Left Clamp Position
Tension Settings
The tension force and related parameters can be set.
Parameter
Tension Settings
Cleave Tension
Tension Fine Adjust
Auto Readjust
Tension
The following figure shows the fiber tensioning process.
Cleave
Fine-Adjust
Tension
Tension
Coarse
Operation
Tension Adjusting
Sets the distance between right edge of the left clamp and cleaving
blade.
Displayed the calculated tension from the cleaving diameter. This
parameter can be changed.
Sets the threshold for the cleaver to switch from coarse to fine
adjusting.
Sets the tension loss threshold for starting to re-adjust the tension. If
set to "OFF", the cleaver will not re-adjust tension.
Fine Adjust
Cleave
Operation
Operation
Description
Description
Auto Re-Adjust
Tension
Tension
Re-Adjust
Cleave
Operation
Cleaving
CT114_Rev
2
Tension
Re-Adjust
Time
51