Calibration Coefficient - GE 9100c Technical Reference Manual

4.5.9 Calibration
Coefficient
Remarks
M1207026
M1207027
Reproduced from the electronic master in MATRIX
The Calibration Coefficient value should be entered:
• Before the Inspiratory Flow Valve Calibration.
• Before the Flow Sensor Positive Calibration.
• Before the Flow Sensor Negative Calibration.
The Calibration Coefficient is marked on the calibration orifice.
The data is stored in EEPROM and is used during the calibration to
compensate for the individual calibration orifice characteristics.
004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
4 Service Tests and Service Mode
4-25