9100c
9.2.2 To remove the
lower access panel
9-6
M1207027
Reproduced from the electronic master in MATRIX
You must remove the lower access panel to repair or replace the
transformer assembly if equipped.
1. Bleed all gas pressure from the machine (Section 9.1).
2. Ensure that all cylinder and pipeline gauges read zero before
proceeding.
3. If present, remove the inboard cylinders.
4. To remove the lower access panel, fully loosen the six screws
that hold the panel in place.
004
MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
M1207026