Canon Arizona 6100 XTHF Mark II Series User Manual page 180

Empty the Waste Ink Tray
2. Place a suitable empty container that holds at least 1.5 liters into the tub. Insert a funnel.
3. Rotate the waste valve knob counter-clockwise until the white line is vertical to start the flow of
waste ink.
4. Shut off the valve when ink no longer drains out (or if the container becomes full). Use a piece of
cloth or paper towel to wipe the valve clean.
NOTE
If ink has dried in the waste valve from previous draining, it may be necessary to
carefully use a significant amount of force to open the valve.
180 Chapter 9 - Printer Maintenance