Canon Arizona 6100 XTHF Mark II Series User Manual page 80

Tools and Utilities Module
Shutdown
Use the Shutdown icon when you need to turn the printer power off. The printer should be left
powered On at all times but there are exceptions such as some service procedures, or if the
printer requires a reboot. Refer to the section
Generate Logs
The System Logs are raw data log files for service diagnostics and troubleshooting purposes.
They are meant for service technicians to help with troubleshooting. Generate system logs only
when requested by an Canon service technician and follow the instructions below for retrieval of
the files.
NOTE
When System Logs are generated, any previously saved log files are deleted. Therefore, do not
generate a second batch if you have just recently generated log files (unless requested to do so
by a service technician).
Use your internet browser to access the log files. Type http:// and then the network name of your
printer. You can find the network name on the printer monitor in the tab [Settings] / [Network
connection]. If the network name is WHITEHORSE7, then enter http://whitehorse7 in the browser
address field.
80 Chapter 3 - How to Navigate the User Interface
Turning Power ON and Off on page
87.