Side Wall Brackets; Removing The Side Wall Bracket - Dell 2WMYN Installation And Service Manual

Figure 29. Installing a cooling fan
Next steps
Follow the procedure listed in

Side wall brackets

Removing the side wall bracket

There are two side wall brackets on either side of the system. The procedure to remove is similar.
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud.
4. Remove the cooling fan cage
NOTE: Ensure that you note the routing of the cables as you remove them from the system board. Route the cable
properly when you replace it to prevent the cable from being pinched or crimped.
Steps
1. Press the tab to release the side wall bracket cover.
NOTE: Unroute the cables to release them from the side wall bracket.
2. Release the bracket from the chassis, and lift it away from the system.
42 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
assembly.
system.
system.