Dell 2WMYN Installation And Service Manual page 59

Figure 50. ODD and no PERC configuration
Table 19. ODD and no PERC configuration
From
CTRL_SRC_SB1 (Signal connector on the front PERC)
CTRL_DST_SA1 (Signal connector on the drive backplane)
ODD (Optical Disk Drive connector on system board)
ODD_PWR_1 (ODD card power connector)
BP_PWR_1 (Power connector on backplane)
BOSS_PWR (BOSS card power connector)
SL10_PCH_PA5 (BOSS signal connector on system board)
To
BP_DST_SB1 (Signal connector on backplane)
SL9_PCH_SA1 (Signal connector on system board)
ODD (Optical Disk Drive)
SIG_PWR_3 (Power connector on system board)
SIG_PWR_3 (Power connector on system board)
BOSS_PWR (Power connector for BOSS card on system
board)
BOSS signal on BOSS S2 card module
Installing and removing system components 59