Removing The Expansion Card - Dell 2WMYN Installation And Service Manual

Removing the expansion card

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. If required, remove the air shroud.
Steps
1. Rotate to open the PCIe card holder.
2. Disconnect the cables form the expansion card.
3. By holding the edges lift the expansion card from the PCIe slot on the system board
Figure 68. Removing the expansion card
4. Install the metal filler bracket if not replacing the expansion card.
NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
78 Installing and removing system components