Component Names And Functions (1) - Sanyo NV-E7000 Installation And Operation Manual

COMPONENT NAMES AND FUNCTIONS (1)

OPERATING THE NAVIGATION UNIT
MAIN UNIT
É
button
¡Displays the menu screen.
¡Pressing for over 1.5
seconds will switch to the
image adjustment mode.
(See p.178)
Ñ
button
Displays the present
location map.
(See p.62)
Ö
button
– : reduce volume, + : increase volume
Ü
button
The screen will switch from the NAVI mode to the
DVD mode to the VIDEO mode (only with a video
deck/video camera connected) every time this
button is pressed.
(See p.56)
Å
button
¡Press this button to move the display back one
screen when using the menu.
(See p.40)
¡Pressing while in image adjustment mode will
cancel that mode.
(See p.180)
37
á
button
Every time this button is
pressed, the map display
switches from 3D view to
planimetric map (North Up)
to planimetric map (Heading
Up).
(See p.59)
à â
button / button
IN/OUT buttons
Enlarge (IN)
Reduce (OUT)
(See p.60)
Ä
button
¡This button executes the item
selected on the screen. (See p.40)
¡Press while the screen is displaying a
map and a quick menu will appear.
(See p.70)
JOYSTICK (u)
¡Used when changing the position display
map and when selecting items appearing on
the screen. (See p.40)
¡When in image adjustment mode, use the
vertical joystick (d) to select items to adjust
and the lateral joystick (s) to perform the
adjustment. (See p.178 to 180)
Liquid crystal display
Brightness sensor
Speaker
S-video output terminal
(See p.195)
Video I/O terminal
Used when connecting to a TV
image input terminal using the
included RCA cord (when in
VIDEO mode).
(See p.195)
Audio I/O and optical digital
audio output terminal
Used when connecting the sound
input terminal of a TV or amp
using the included RCA cord
(when in AUDIO mode).
(See p.195)
Headphone terminal
Used when connecting commercially
available headphones.
(See p.195)
Power supply switch
I
N
T
R
O
D
U
C
T
I
O
N
Remote control
infrared receiver
Extension terminal
Brake terminal
Connects to the vehicle's parking
brake signal line.
(See p.50)
GPS exterior antenna terminal
Connects to the included GPS
exterior antenna.
(See p.36)
DC input 9V terminal
Connects to the included 12V vehicle
battery cigarette lighter cable / the
included AC/DC adaptor. (See p.50
and 51)
38