Sanyo NV-E7000 Installation And Operation Manual page 63

SETTING THE 2-SCREEN DISPLAY (2)
Select Crossing Enlargement Display
and press the Ä button.
A mark is indicated.
... Indicates that this condition is set.
To change, press the Ä
button again to delete the mark.
Hint
¡If signal reception from the
GPS satellite is cut rendering
accurate positioning impossible
or if there is a significant error
in the GPS data, the
intersection enlargement
function will not operate
properly. Also, if the distance
between intersections is too
short, this function will be
disabled.
¡Even if having placed a
mark in
Crossing Enlargement Display ,
the display will not appear
without having approached the
intersection.
¡Because the display is based
on the data stored on the map
disc,
– intersection enlargement
display and junction view will
not be effectuated at
intersections and junctions
not available in the stored
data.
– depending on the
intersection, the intersection
name may not be indicated.
117
Hint
– because the data in the map
disc is only as updated as
the time of purchase, the
displayed content may differ
from actual conditions.
¡The junction views in the map
disc included with the unit
correspond to only some
highways.
¡When intersections are
enlarged, the right screen
changes into an intersection
enlargement
illustration/junction view.
5
To complete setting...
press the Ñ button to
return the screen to the present
location map.
Press the É button to
return to the menu screen.