Sanyo NV-E7000 Installation And Operation Manual page 47

ABOUT SETTING ROUTES (2)
ABOUT ROUTE SEARCHES
¡Route searches take a bit of time to effectuate when the distance between the departure
point and the destination is great or when selecting a multiple route search.
¡If the distance between the departure point and the destination is excessively great
rendering a route search is impossible, the unit will display the message "Route can not
be calculated. Please shorten the distance" and the search will be stopped. In such a
case, modify the settings (departure point/waypoints/destination) and shorten the
distance between the departure and the destination.
Example:
going from point A to point C
One method would be to:
q Set the route from point A to
Set the route from
point B and go to B.
point
w Set the route from point B to
point C and go to C.
¡Route searches are effectuated based on the search data stored on the map disc,
however, the stored data may not have all the road (place) information on the map. In
case of having registered departure(
not available in the stored search data, the unit will conduct a search for the shortest route
using points available in the search data bank that are near the registered points in a
straight line and use them as the actual departure(
point. Because of this function, your route is not limited to using the roads registered by
the departure( )/waypoint( )/destination(
87
First guided trip Second guided trip
Set the route from
to point . point to point .
)/waypoint( )/destination( ) point for locations
)/waypoint( )/destination(
) point inputted.
Roads in the search data
Roads not in the search data
Search result (set route)
Refer to the road map legend of
the map disc instruction manual
to find out whether the road is
available in the search data.
Point A, nearest to the registered
point in a straight line, becomes the
actual departure point.
✔
* If you select at Check Highway
geographical points adjacent to highways and local roads, a confirmation message will appear
asking whether to set highways for your trip.
¡Because the search data stored in the map disc varies, the reference routes provided will
differ depending on the disc used even if the departure/waypoint/destination points and
search conditions are the same.
)
ABOUT SAVING ROUTES
¡The route will be saved even if cutting the power of the unit OFF.
¡The set route is stored temporarily as a
next operation, this route will be automatically erased and the new route set/retrieved by
that new operation will become the
– When newly setting routes after effectuating a quick route/single-route/multiple
route/home route search.
– When having modified a route.
– When re-effectuating a route search (detour/reroute).
– When the route is automatically modified after having set ✔ for auto-reroute.
– When retrieving a stored route (routes saved as described in "Saving the present
route").
Save the desired route in the memory as described
in "Saving the present route" (See p.100).
The unit can store up to 20 routes.
Point C, nearest to the registered
point in a straight line, becomes
the actual destination point.
Point B, nearest to the registered
point in a straight line, becomes
the actual waypoint.
from Preferred Route and having registered
, however, when effectuating the
Current Route
Current Route .
N
A
V
I
88