Sanyo NV-E7000 Installation And Operation Manual page 53

MODIFYING A ROUTE (2)
CHANGING/DELETING
WAYPOINTS
q Select the waypoint to be
changed/deleted and press the
Ä button.
Example of selecting waypoint 1.
w
IF CHANGING
Register a new waypoint(s).
See p.95, " "
ADDING WAYPOINTS
for the registration method.
e IF DELETING
Select and
Delete this point
press the Ä button.
Select and press the
Yes
Ä button.
Example of deleting waypoint 1.
Original destination point.
97
ADDING WAYPOINTS
q To add a location, select
Add
and press the Ä button.
Example of adding a waypoint between
the departure point and waypoint 1.
w Register a waypoint.
See p.95, " "
ADDING WAYPOINTS
for the registration method.
* Up to 5 waypoints can be registered.
Added waypoint
Original waypoint
5
Change search conditions.
CHANGING SEARCH
CONDITIONS
q Select the search conditions
you want to change and press
the Ä button.
w Because pressing the Ä
button effectuates a search
condition modification, display
the search conditions you want
to set.
To make a search condition
Ä
modification, press the button
again.
Example for "Faster Route".
e Select
Calculation Start or
3 Route Calculation and press the
Ä button.
If having selected Calculation Start ,
the route guidance screen appears
and route guidance is initiated when
the route search is complete. If having
selected 3 Route Calculation , 3 route
selection screens appear. Select the
desired route and press the Ä
button to move the display to the route
guidance screen and start route
guidance.
zSee p.91, "Register the desired
destination point and set the search
conditions".
Hint
¡If having set a waypoint(s),
will not
3 Route Calculation
appear.
¡Save the desired routes in the
memory.
zSee p.100, "Saving the
present route".
¡When the 3 route selection
screen is displayed, buttons
other than the Ä button
are disabled.
¡If having modified a route
retrieved from the memory, the
stored route cannot be
changed.
¡To stop route guidance, refer to
p.104, "Pause route guidance".
N
A
V
I
98