Sanyo NV-E7000 Installation And Operation Manual page 49

SINGLE-ROUTE/MULTI-ROUTE SEARCH (2)
REGISTER THE DESIRED
DESTINATION POINT AND SET THE
SEARCH CONDITIONS New Route
A destination can be registered to
search for a location using various
methods.
1
Press the É button.
2
Select New Route from the
drop-down menu and
press the Ä button.
3
Verify if the cursor is aligned
with and press the
Destination
Ä button.
4
Select the search method and
press the Ä button.
Then, the unit will display a
map of the area surrounding
the registered point using the
selected search method (See
p.71 to 81).
¡
Near Map on Display
¡
Near Current Position
¡
Recent Destination
¡
Address
¡
Intersection
¡
Nearby POI
¡
Point of Interest
¡
Phone Number
¡
Saved Points List
¡
Lat./ Long
91
5
Move the Joystick to align the
cursor with the "+" mark on
the map and press the
Ä button.
: After a checkered flag ( )
appears at the destination point,
the route editing screen will be
displayed. Select Calculation Start
and press the Ä button to
effectuate a single-route search
using the presently set search
conditions.
< Modifying search conditions
Search conditions can be set
between each geographical point
if multiple points are set. Every
time the Ä button is
pressed, the display switches
from to
Faster Route
Shorter Route to Optimal (in that
order).
* If selecting Shorter Route , you
may be led by the unit to drive
through narrow roads and get on
and off highways.
* Even if selecting ,
Shorter Route
the unit still prioritizes basic roads
near the departure and destination
points that are easy to drive on for
safety reasons and may not always
provide the shortest distance.
* Even if selecting Shorter Route ,
for safety reason, the unit may not
always select the shortest route to
your destination.
< Stopping a route search
Press the É button.
6
Select or
Calculation Start
3 Route Calculation and press the
Ä button.
: A route search is initiated.
zSee p.93, "About the display after a
route search".
Selecting 3 Route Calculation and
pressing the Ä button will
enable the selection of Route A ,
Route B and Route C . Select the
route using the Joystick (d) and
press the Ä button.
Route guidance screen
3 Route Calculation
* Selecting will
disable all keys other than those used
to select one of the routes.
Hint
¡To stop route guidance, refer
to p.104, "Pausing route
guidance".
¡For a description of the items
appearing on the route
guidance screen, see p.57,
"How to view the map screen".
¡The duration of your trip is an
estimation based on a speed
of 50mph for highways, 30mph
on national/state roads, 25mph
on local roads and 10mph on
other roads. This time does
not correspond with your
vehicle's actual speed.
¡Save the desired route in the
memory. See p.100, "Saving
the present route".
¡Multiple-route searches take
more time to effectuate than
single-route searches.
¡The search conditions
Faster Route
(
/ Shorter Route / Optimal )
set here will be used again for
the next route search.
zSee p.105, "Modify route
search conditions".
¡If having set a waypoint(s),
3 Route Calculation will not
appear.
N
A
V
I
92