Connecting A Video Deck/Video Camera; How To Adjust The Image - Sanyo NV-E7000 Installation And Operation Manual

CONNECTING A VIDEO DECK/VIDEO CAMERA

Use the AUDIO and VIDEO RCA cords included with this unit to enable the playback of
images from your video deck or video camera.
1
Connect your video deck/video camera to the unit.
* Prior to connecting, cut off the power supply to the video deck/video camera.
Video deck/video camera
AV output
Mini-plug
To video I/O terminal
Included RCA
cord (VIDEO)
Red
Yellow
White
If the audio output for the
video deck/video camera is
Included RCA
set to mono, connect only
cord (AUDIO)
the white plug.
Prior to connecting the video deck/video camera to the unit, mount the included large ferrite core to the
RCA cord (AUDIO).
Align the cord with the groove
in the large ferrite core and
make one turn.
2
Turn the power supply ON for the video deck/video camera
"VIDEO" will be displayed on the screen for roughly 10 seconds.
*If the unit is in another mode, press the Ü button to return the unit to the VIDEO mode.
3
Start playback on the video deck/video camera.
* Refer to the video deck/video camera instruction manual for their respective operation
method.
Hint
When connecting the unit to the video deck/video camera, press the MODE button to
switch modes in the following order:
Video deck/video camera operation is enabled only after having put the unit in VIDEO
mode.
177
Mini-plug
Please use the
To audio I/O-optic digital audio
large ferrite core
output terminal
"VIDEO" "NAVI" "DVD"

HOW TO ADJUST THE IMAGE (1)

■ When in NAVI mode: DIMMER / BLACK / BEEP
■ When in DVD mode: DIMMER / BLACK / DISPLAY / BEEP
■ When in VIDEO mode: DIMMER / COLOR / TINT / BLACK / DISPLAY / BEEP
Hint
¡The dimmer can be set to AUTO or MANUAL.
When the dimmer is set to AUTO, it can be adjusted to H LEVEL or L LEVEL.
¡The display can be set to FULL, WIDE, CINEMA or NORMAL.
É
button
JOYSTICK (a)
É
JOYSTICK (a)
Å
button
1
Press the MENU button for at least 1.5 seconds.
The adjustment mode appears on the screen.
DIMMER AUTO
H LEVEL
L LEVEL
To end image
COLOR
adjustment, press
TINT
the Å
BLACK
DISPLAY FULL
button to cancel the
BEEP ON
adjustment mode.
2
Select the item to be adjusted using the Joystick (d).
* The adjustment mode screen will disappear after roughly 10 seconds.
Perform the operation described in step
button
Å
button
The adjustment mode
27
display will only appear for
1
roughly 10 seconds. Before
2
it disappears, perform step
R13
2
.
0
3
before it disappears.
178
O
T
H
E
R