Rotating The Image; Changing The Initial Settings - Sanyo NV-E7000 Installation And Operation Manual

ROTATING THE IMAGE

The displayed image can be rotated.
* When performing this function, we recommend you switch the play mode to "SINGLE".
JOYSTICK (a)
Press the Joystick in the directions described below while
the image is displayed.
Press the Joystick on the left side (f): the image is rotated 90
Press the Joystick on the right side (g): the image is rotated 90
Press the Joystick on the top (h): the image is inverted vertically
Press the Joystick on the bottom (j): the image is inverted laterally
Hint
If changing the screen orientation during a slideshow and then switching to
the next file, the file that was rotated will remain changed.
163

CHANGING THE INITIAL SETTINGS (1)

JOYSTICK (a)
degrees counterclockwise
degrees clockwise
Å w
/STOP button ( )
JOYSTICK (a)
Ä
button
q
PLAY/PAUSE button ( )
BASIC OPERATION
1
Press the ! button (
stopped.
The settings menu screen appears.
2
Use the Joystick (d) to select a setting item and press
the Ä button.
SELECTED ITEM
¡AUDIO
¡SUBTITLE
LANGUAGE
¡MENU
¡OSD
¡D-RANGE
AUDIO
¡AUDIO-OUT
¡TV ASPECT
DISPLAY
¡LEVEL
Selection
¡PASSWORD
possible only
PARENTAL
when playback
is stopped.
®
button
JOYSTICK (a)
Ä
button
Å
/STOP
w
button ( )
!
button
) while playback is
Operable only with the
D
remote control device.
V
D
C
D
J
P
E
G
The selected item will light up yellow.
SETTINGS
: switch audio language during DVD video
playback
: switch subtitle language during DVD video
playback
: switch DVD menu display language
: switch initial settings display language
: sharp sound quality enabled during DVD
video playback even at a low volume (only
with Dolby Digital sound)
: setting for sound output from speakers,
headphones and the audio I/O and optic
digital audio output terminal
: switch the image aspect ratio during DVD
video playback
: audio-visual control level setting
: password change to prohibit others from
modifying the audio-visual control level
setting
164