Table of Contents
Advertisement
Carefully pull the battery upward until there is sufficient
4.
space to slide the battery out of the socket. You can lift
the battery with a plastic screwdriver or orange wood
stick; however, be careful to avoid scratching the system
board.
Remove the battery and discard in accordance with the
5.
manufacturer's instructions.
With the positive (+) side facing up, slide the new
6.
battery into the socket.
Replace any removed expansion boards.
7.
Replace the system access cover.
8.
Connect external peripherals and power cables
9.
10.
Run the Setup Utility to reconfigure your system
parameters (see Chapter 4).
2-20 Using Your Computer
Locating the battery
Advertisement
Table of Contents
