Installing an Expansion Board
Although Plug and Play boards are detected by the system,
and potential conflicts are resolved automatically, boards
which are not Plug and Play may require you to change
settings. Before installing the new board, check its
documentation and the Interrupt Request (IRQ) assignments
in Appendix C. This information ensures that your new
board does not conflict with any installed components.
Follow these steps to install an expansion board.
Remove the access cover (see "Removing the Access
1.
Cover").
Follow any preinstallation instructions that come with
2.
the expansion board (such as setting switches or jumpers
on the board).
5-10 Installing Options
Locating expansion slots