NEC VERSA 2600 Service Manual page 58

5. Press Esc as many times as needed to close the screen, and to exit Setup. When
you exit Setup, be sure to save your changes reboot your system.
Removing a Password
Remove a previously set password by opening the Password screen and entering the previ-
ously set password. Press
from the word "Password" on the Security drop-down menu.)
Key
These menu settings control how the NEC Versa 2600 keyboard functions, and includes the
following options:
T
Keyboard Type
Lets you select the desired keyboard format. U.S.A. is the default.
T
Typematic Delay
Sets the time delay between the moment a key is pressed and the time the charac-
ter appears on screen. The default is 500 milliseconds (ms).
T
Typematic Rate
Sets the number of characters that appear on-screen if a key remains pressed for a
second. The default is 10 characters per second (cps).
Power
The Power drop-down menu lets you balance system performance and energy conservation,
for both battery and AC operation, using the following parameters.
Battery Operation
T
Maximum Battery life
Sets power savings to a maximum and system performance to a minimum, by
running the CPU at half speed all of the time.
T
Good Battery life
Provides good power savings and moderate system performance, by reducing
CPU clock speed to one-half of its maximum speed any time the CPU is not en-
gaged for one-half a second.
on the keyboard. (The check mark should be removed
Enter
NOTE
Some operating systems such as Win-
dows for Workgroups and Windows 95 have
their own power management software which
overrides CMOS settings. In this case, be sure to
set your desired power management settings ac-
cordingly.
Setup and Operation 2-23