Versaglide Assembly - NEC VERSA 2600 Service Manual

At this point the following components maybe removed from the unit independently.
T
Sound Board
T
VersaGlide
T
LED Status Board
T
IR board
The Sound Board must be removed to disassemble the computer further (i.e. CD-ROM
Reader, Bridge Battery, FDD/HDD Connector Board, Diskette Drive, Power Board and
Main Board).

VersaGlide Assembly

Remove the, VersaGlide, as follows
1. Remove the prior assembly as previously described.
2. Locate the cables that are attached to the sound board at connector CN407 and
CN406 disconnect both cables.
Figure 4-10 Disconnecting the VersaGlide Cables
Field Service Guidelines 4-13