Required Tools and Equipment
All NEC Versa corrective maintenance procedures can be performed using the following
tools:
T
Tweezers
T
Small flat-head screwdriver
T
Small Phillips screwdriver
T
Small Hex-bolt screwdriver
T
Small utility knife
T
Rubber finger tip
T
Right angled dentist style probe.
Battery Pack
Remove the battery pack installed in the NEC Versa 2600 system as follows.
1.
Make sure the power is off.
Close the LCD and turn the system over.
2.
3.
Press the battery release latch and slide the battery out of the system.
Figure 4-1 Releasing the Battery Pack
Field Service Guidelines 4-5
Battery
Release Latch
Battery
Pack