Keyboard - NEC VERSA 2600 Service Manual

Keyboard

Remove the keyboard from the system as follows.
Insert a fine flat head ceramic tip screwdriver between the following keys to re-
1.
lease the four locking tabs that secure the keyboard.
and
Fn
Alt and
Space Bar
Ctrl and the key to the right that contains the Tilde
Use the same screwdriver to gently lift the front edge of the keyboard up and to-
2.
wards the LCD screen.
3. Disconnect the two Keyboard cables from Connectors CN10 and CN11 on the
Main board.
4. Remove the Keyboard from the system.
Hard Drive
Figure 4-4 Remove Hard Disk Drive (Step 3)
Ctrl
Space Bar
and Alt
Field Service Guidelines 4-7
(~)