Open the port cover on the back of the system.
2.
Attach the 15-pin cable connector to the monitor port on
3.
the system. Secure the cable connection with the screws
provided.
Connect the monitor power cable and plug it into a
4.
properly grounded wall outlet.
Follow any setup instructions in the monitor's user's
5.
guide.
Turn on power to the monitor.
6.
Power on the NEC Versa.
7.
Printer
You can attach a printer with either a parallel or a serial
connector. A parallel printer connector has 25 pins; a serial
connector has 9 pins. Some printers come with both types
of connectors.
Monitor
Monitor
Port
Signal Cable
Connecting a monitor
Using Your NEC Versa 4-29