NEC VERSA 2600 User Manual page 66

T
Boot Device
Select the drive you want your system to read from when
the computer starts-up. Specify the boot sequence, by
instructing the system to look
T
Boot Display
Lets you specify the system display screen as the NEC
Versa 2600 LCD screen (the default), an external CRT
display, or both.
T
Power Switch
Lets you determine how the Power Switch (located on
the hinge beneath the LCD display) functions after the
NEC Versa 2600 is powered on.
Components
This drop-down screen displays configuration settings for
the serial and parallel I/O ports as well as the sound device
and speakers.
The Speaker item displays a check mark which means the
system's built-in speakers are enabled (the default). An
empty underscore means the speakers are disabled.
3-8 Using Setup and Power Management
only to the Hard Disk, drive C
first to the Diskette, drive A, and then to drive C.
Suspend/Resume lets you use the Power Switch to
save battery power. This selection is appropriate for
Windows 95 systems, which automatically power
off when you shut down the Windows 95 software.
ON/OFF (the default) turns the system on or off,
and should be used by Windows for Workgroups
systems.