Around The Sides Of The System - NEC VERSA 2600 User Manual

T
Port Replicator Latches — Use these "ports" as latches
for securing the port replicator. A Port Replicator Latch
is located at each end of the back of the system.
T
Keyboard/Mouse Port — Use the standard PS/2 port to
connect an external PS/2-style mouse or a PS/2-style
keyboard to the system.
T
Expansion Port — This 200-pin port provides a connec-
tion for the NEC Port Replicator 2600.
T
Monitor (Video) Port — Use this 15-pin port to attach
an external monitor to your NEC Versa 2600. You can
run the LCD display and the external monitor simulta-
neously or run either alone.
T
Parallel Port — Use this 25-pin port to connect a paral-
lel printer or other parallel device. This port provides
both ECP and EPP mode support. The ECP standard
provides you with a greater transfer speed than the con-
ventional parallel port. It also supports bi-directional
and uni-directional protocols.
T
Serial Port — Use this 9-pin port to connect an external
modem or other serial device.
T
AC Power Port — This 4-pin AC power port lets you
attach the NEC Versa 2600 to the AC power source us-
ing the AC adapter that comes with your system. Keep
the system connected to AC power whenever possible to
keep the battery pack and internal CMOS battery
charged.

AROUND THE SIDES OF THE SYSTEM

Your NEC Versa 2600 comes with features on both sides.
This section shows you where those features are located and
describes their use.
Getting Started 1-9