Ir Port - NEC VERSA 2600 User Manual

Remove PC cards from Windows 95 system as follows.
From the screen, select "My Computer," then "Control
3.
Panel."
Double click on the PC Card icon.
4.
Select the PC Card to remove and select "Stop."
5.
Windows 95 alerts you if any applications are still using
the card. If all applications using that card are closed,
services for that card are shut down, and you get a
message telling you it is safe to remove the card.
Press the Release button on the side of the PC card in
6.
the slot.
Pull the card out of the slot.
7.

IR Port

The IR port on the back of your system lets your NEC
Versa communicate with other devices that also use infrared
technology. The IR port is Infrared Data Association
(IrDA) compatible. You can easily transfer files between
your NEC Versa and an IR-equipped desktop, or print to an
IR-equipped printer without using cables.
When your NEC Versa ships, the IR port is enabled.
For the infrared technology to work, follow these guidelines:
T
position the NEC Versa no more than three feet way
from the IR peripheral device you are using
T
keep the IR port between the computer and the device
parallel.
The LapLink software that ships with your NEC Versa
system provides ways for you to use the IR port. Read the
instructions in Chapter 2 under "How to Use LapLink" for
steps on using the software with the IR port.
Using Your NEC Versa 4-21