NEC VERSA 2600 User Manual page 25

Check that the AC outlet voltage registers in the
range of 100 – 240 Volts AC. Verify that the cord
and plug are appropriate for your AC source.
Use only the AC adapter that comes with your NEC
Versa 2600 Series system. Although other AC
adapters may look similar, using them can damage
the system.
Connect the AC adapter as follows:
1. Connect the AC adapter cable to the power port on the
back of your NEC Versa 2600 Series system.
2. Plug one end of the AC power cable into the AC adapter
and the other end into a 120 or 240-volt wall outlet.
AC
Power Cable
1-14 Getting Started
!
WARNING
!
CAUTION
LED
AC
Power Port
AC
Adapter
Connecting the AC adapter