Inserting A Pc Card - NEC VERSA 2600 User Manual

Inserting a PC Card

To insert a PC card, open the slot cover and follow these
steps.
NOTE
slot cover open if you are using a PC card for a long
period of time. Some PC cards can overheat and
damage the system.
Align the card so that the 68-pin connector points to-
1.
wards the slot.
Slide the card into either slot. If you plan to use two
2.
cards at the same time; (one being a Type III) slide that
card into the top slot and the second into the bottom slot.
These two slots will support either two Type I , two
Type II or one each Type I and Type II or one each
Type III and one of either Type I or Type II at the same
time. A low tone followed by a high tone lets you know
that the card is fully inserted and recognized. (If you
turn off the sound, no sound is emitted.)
NEC recommends that you keep the PC card
PC Card
Inserting a PC card
Using Your NEC Versa 4-19