NEC VERSA 2600 User Manual page 65

PARAMETER
Lid Close
PCMCIA Power (Suspend)
Miscellaneous
Low battery beep
Wake Up Alarm
Hour
Minute
L2 Cache
Exit
Save and Exit
Save and Reboot
Exit (No Save)
Default Settings
Version Info
As a new user, it will be important for you to check and,
perhaps, change the following parameter settings.
Startup Menu
T
Date and Time
Set the System Date and Time to the current time and
date. Use numerical input (remember that the hour set-
ting begins at 0 and ends at 23). The settings remain in
memory even after you turn off system power.
DEFAULT ALTERNATE
SETTING SETTINGS
Suspend Standby, Backlight off
Enabled (checked) Disabled (unchecked)
Enabled (checked) Disabled (unchecked)
Disabled One Time, Every Day
User input
User input
Enabled (checked) Disabled (unchecked)
To save the current
setup parameters
(with changes) and
exit setup.
To save the current setup
parameters, then reboot
the computer.
To exit Setup without
saving any parameter
setting changes.
To restore the default
Setup settings, then Exit.
Displays
information about
Setup and BIOS.
Using Setup and Power Management 3-7