Secure Web Console I/O Card Replacement
c. To configure the network parameters for the SWC, fill in the prompts shown in the following
illustration:
d. When all necessary data is entered, click on [OK] to reboot the SWC.
Step 6. Using a web browser, connect to the SWC card, using:
•
the newly assigned IP address, and
•
the newly created administrator log-in and password.
NOTE
Step 7. Connect the serial cable between the SWC card and the server's console port.
150
It may take as much as 45 seconds to gain initial access to the SWC card.
Chapter