Run Setup; Follow On-Screen Instructions For Windows - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 9

Run Setup

To run the Setup program, follow the steps listed below for either Microsoft
Windows NT 4.0 and Windows 95, or for Windows NT 3.51:
Microsoft Windows NT 4.0
Step and Windows 95
1. Select Start from the taskbar. Then
choose Run from the Start menu.
2. Insert Diskette 1 of "NetRAID
Assistant for Windows NT and
Windows 95."
3. Type <d>:\setup at the Open
prompt, where <d> is the drive letter
of the diskette drive you are using.
4. Go to Step 5.

Follow On-screen Instructions for Windows

5. On the User Information screen, type the user name and the company.
6. For Windows 95, go to Step 7.
For Windows NT, on the Select Installation Options window, select one of
the following options:
Manage NetRAID adapter(s) in this server only. (If you choose this
option, skip Step 7 and go on to Step 8.)
Manage NetRAID adapter(s) in this server and in other NT and
NetWare servers on the network. (If you choose this option, go on to
Step 7.)
7. For clients running Windows 95, select one or both of the following
utilities:
NetRAID Registration Server manages a list of HP NetRAID adapters.
NetRAID Assistant is the management utility.
Managing Servers Over the Network
Microsoft Windows NT 3.51
Select File/Run from the Program
Manager.
Insert Diskette 1 of "NetRAID
Assistant for Windows NT and
Windows 95."
Type <d>:\setup at the Run prompt
and click OK, where <d> is the drive
letter of the diskette drive you are
using.
Go to Step 5.
103