HP D5970A - NetServer - LCII Installation And Configuration Manual page 129

Netraid series
Hide thumbs Also See for D5970A - NetServer - LCII:
Table of Contents

Advertisement

Chapter 11
x Logical Drives Degraded
Problem: x number of logical drives signed on in the degraded (critical) state.
Suggested solution:
1. Use a utility, such as HP NetRAID Assistant or HP NetRAID Config, to
determine which physical drive(s) is not responding and thereby makes
the logical drives degraded.
2. Correct the problem with the physical drive(s) by reconnecting, replacing,
or rebuilding the physical drive(s).
1 Logical Drive Degraded
Problem: One logical drive signed on in the degraded (critical) state.
Suggested solution:
1. Use a utility, such as HP NetRAID Assistant or HP NetRAID Config, to
determine which physical drive is not responding and thereby makes the
logical drive degraded.
2. Correct the problem with the physical drive by reconnecting, replacing, or
rebuilding it.
Insufficient Memory to Run. Press any Key to Continue ...
Problem: There is insufficient memory in the HP NetServer to run the HP
NetRAID BIOS.
Suggested solution: Check the HP NetServer to be sure that the memory is
properly installed.
Insufficient Memory
Problem: There is insufficient memory on the adapter for the current
configuration.
Suggested solution: Check the adapter to be sure that the memory is properly
installed.
Troubleshooting
121

Advertisement

Table of Contents
loading

Table of Contents