HP D5970A - NetServer - LCII Installation And Configuration Manual page 177

Span Arrays check box, 61, 63
spanning arrays, 63
states of physical drives, 55
static electricity, 11, 43, 49, 94
Step A. Plan Your Hardware, 29
Step B. Plan Arrays and Logical
Drives, 33
Step C. Prepare the Adapter, 43
Step D. Install the Adapter, 48
Step E. Install Cables and Set SCSI
Switches, 50
Step F. Boot HP NetServer Navigator to
Launch HP NetRAID Assistant, 52
Step G. Configure Arrays and Logical
Drives, 53
Step H. Save Configuration and
Initialize, 66
Step I. Decide Which HP NetRAID
Drivers You Need, 69
Step J. Use the HP NetServer Navigator
CD-ROM to Prepare Disks, 70
Step K. Install NOS and HP NetRAID
Drivers, 73
Step L. Install NOS-specific
Configuration Utility, 74
Step M. Run Configuration Utilities, 76
Step N. Prepare for Online Capacity
Expansion, 81
strain relief clips, 50
stripe size (depth)
HP NetRAID, 134
planning, 41
setting, 62
stripe width, 135
striping, 134
T
tagged command queuing, 6
termination of SCSI channels, 6, 77
tools, 10
U
Ultra SCSI
channels, 51
Ultra2 SCSI
channels, 51
Undo button, 63
undoing
hot spares, 60
logical drives, 63, 65
physical drives, 65
upgrading to an HP NetRAID-3Si
adapter, 93
UPS and I/O cache policy, 41
utilities
configuration, 69
EISA Configuration Utility (ECU),
76, 79
HP NetRAID Assistant, 53, 113
HP NetRAID Config, 115
HP NetRAID Express Tools, 76, 117
installing NOS-specific, 74
latest versions, 70
Setup, 76, 80
V
virtual sizing, 62, 129, 134
W
Wizard. See HP NetRAID Assistant
Wizard
Worksheet A, 142
Worksheet B, 143
write policy, 135
planning, 41
setting, 62
Index
169