Create Drivers Diskette And Instructions; Make Nos-Specific Configuration Utility Diskette - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 6

Create Drivers Diskette and Instructions

You must use the HP NetServer Navigator CD-ROM to create the diskette
containing the drivers for your NOS and the instructions for installing them.
1. Turn on the HP NetServer and monitor, and insert the HP NetServer
Navigator CD-ROM into the drive. Turn off the HP NetServer power, wait
10 seconds, and turn it back on again.
2. From the HP Navigator Main Menu, choose Configuration and
Installation Assistant.
3. From the Configuration Assistant menu, choose Custom.
4. From the Gather Information window, choose your NOS. If necessary,
also select your version of the NOS.
5. When you see the message, "Would you like to use HP's automated mode
of NOS installation?" click No.
6. From the Custom Configuration menu, choose Create Driver
Diskette(s).
7. From the Create Driver Diskette(s) window, choose Create Driver
Diskette(s). Select the diskette to create, click Execute, and follow the
onscreen instructions.
8. When the driver diskette is complete, click Back to return to the Custom
Configuration menu.
9. From the Custom Configuration menu, choose Show NOS Installation
Instructions.
10. On the Show NOS Installation Instructions window, click Save to Disk.
Later in these procedures, you will print the Network Operating System
Installation Instructions.
11. Click Back to return to Configuration Assistant, and click Back again to
return to the Main Menu. Do not exit the HP NetServer Navigator system,
because in the next step, you will create the NOS-specific configuration
diskette.

Make NOS-specific Configuration Utility Diskette

If your NOS is Windows NT or Novell NetWare, you must make another diskette
containing the NOS-specific configuration utility.
HP NetRAID Series Software
71