HP D5970A - NetServer - LCII Installation And Configuration Manual page 83

Chapter 6
IBM OS/2 Warp Server SMP 4.0
1. Open a command prompt window.
2. Change to the drive where the utility is to be installed.
3. Type cd\ and press the Enter key.
4. Type md NetRAID and press the Enter key.
5. Type cd NetRAID and press the Enter key.
6. Insert the diskette containing the HP NetRAID drivers for IBM OS/2.
7. Type copy <d>:\netraid\*.* and press the Enter key, where <d>
is the diskette drive.
8. Type megaconf.exe from the NetRAID directory to run the HP
NetRAID Config utility.
Novell NetWare 4.11, 4.11 SMP, SFTIII 4.11
1. Exit to the DOS prompt.
2. Insert the diskette called "NetRAID Utilities for NetWare."
3. Type Copy <d1>:\NetRAID\*.* <d2>:\nwserver, where <d1>
is the drive letter for the diskette drive and <d2> is the hard disk where
NetWare is installed. Press Enter.
4. To load the HP NetRAID Config utility, type
load <d2>:\nwserver\megamgr.nlm and press Enter at the
NetWare command prompt.
Novell NetWare 3.12
1. Exit to the DOS prompt.
2. Insert the diskette called "NetRAID Utilities for NetWare."
3. Type Copy <d1>:\NetRAID\*.* <d2>:\server.312, where
<d1> is the drive letter for the diskette drive and <d2> is the hard disk
where NetWare is installed. Press Enter.
4. To load the HP NetRAID Config utility, type
load <d2>:\nwserver\megamgr.nlm and press Enter at the
NetWare command prompt.
HP NetRAID Series Software
75