The Hw Sys Info (Hardware System Information) Menu - HP D5970A - NetServer - LCII Installation Manual

Chapter 2
Only two lines of the main menu can appear on the display at one time. Use the
control panel's up-arrow and down-arrow buttons to scroll up and down through
the menu selections. A cursor shows which line is currently selected.
Lines that begin with a greater-than symbol (>) and have a blinking cursor are
menu selections that lead to other menus. To choose a selection, use the arrow
buttons to move the cursor to the appropriate line and then press the Enter
button.
The menu selections are:
HW Sys Info.: Information on the server's hardware configuration.
FW Info.: The version numbers of the server's firmware.
HW P/N.: Part number and serial number of the server's chassis.
Event Log.: The server's log of current and resolved error conditions.
To return to the Main Menu from one of these selection, press the Escape button
on the control panel. To exit the Main Menu itself, also press Escape.

The HW Sys Info (Hardware System Information) Menu

The HW Sys Info menu displays the server's configuration: the number, speed,
and type of CPUs, cache information, and the amount of RAM on each memory
board. You cannot enter information here, only view it.
When you select HW Sys Info from the Main Menu, you see something like this
on the server's front panel display:
**HW Sys Info***
No. Of CPUs=x
Use the front panel's down-arrow button to scroll down through the rest of the
information. Here is what the full screen looks like. (Remember, you can only see
two lines of it at a time on the front panel display.)
**HW Sys Info***
No. Of CPUs=x
CPU speed 400MHz
CPU type P2/Xeon
CPU0 stepping xx
CPU1 stepping xx
CPU2 stepping xx
CPU3 stepping xx
L2 Cache xxxx KB
Controls, Indicators, and Ports
(x = 1 to 4 CPUs)
17