HP D5970A - NetServer - LCII Installation Manual page 55

Chapter 5
7. Open the retaining clips of the first DIMM just enough so that you can lift
the DIMM's top edge away from the clips.
8. Lift the DIMM completely away from the socket.
9. Place the DIMM in its anti-static container.
10. Repeat steps 5-9 for the other three DIMMs in the bank.
CAUTION
Close all retaining clips on the memory board before
inserting it into your NetServer. This includes clips on empty
slots as well as those on slots containing DIMMs. This
facilitates insertion of the memory board.
11. Replace the memory board. See "Removing and Replacing the Memory
Board" earlier in this chapter.
Installing Additional Memory
47